TheWetNews.Com

Posts Tagged ‘power tools’

Why build a boat from a classic boat plan

Boat building is a craft that has been around for millennia.  The first boats were created around 40,000 years ago.  These boats were tree trunks that had been hollowed out to allow occupants places to sit.  Unless you are extremely adventurous, it is unlikely that this is what you have in mind when considering building a boat. There have been many styles of boat between then and now many of those are easy enough to build for the average craftsman with the right classic boat plan. 

It is a natural tendency for humans to be drawn to the sea.  For many it takes the form of going to the beach or walking along the bank of a river.  For others it takes the form of a love of boating.  With people having been in boats for so many years building with a classic boat plan gives you a connection to the boat builders of the past. 

When you are doing something in the same way as people in the past, you are able to understand them in a way you are not otherwise able to.  This understanding is appealing for the historian and craftsman alike.  For the historian, it can give insights into the culture and lifestyle of those living in the past, even if that past is as near as 50 years ago.

For the craftsman, building a classic boat plan allows them to learn techniques that were used to build boats with hand tools.  Learning wood working with hand tools, before moving on to power tools, is a common technique giving the craftsman the opportunity to learn the basics before moving on to more advanced techniques.

The answer to this question definitely depends on how you are going to use the boat, how many people you want with you in the boat, and what body of water you will be in when you are sailing.

Your experience is also an important factor.  For the beginning boat builder, it is a good idea to start with a smaller boat and then move on to something larger.  Jon boats, dories, and canoes are all good choices.

A jon boat plan will give you a small, flat bottom boat.  There are usually benches in the boat.  Jon boats are commonly used for hunting or fishing in flat water.  A dory also has a flat bottom, but has curved or slanted sides that curve in to meet at the bow and the stern.  A canoe is also a great choice because of its size and versatility.

Incoming search terms:

• 3dboatdesignersoftware com
• flat bottom boat plans
• hot boat bucket seats
• how to make aluminum duck boat
• steel boat building kits
• vinyl boat bench cushions

Fishing Boat Plans – An Imperative in Building Your Own Fishing Boat

If you are someone who enjoys fishing immensely and also has a good grasp of woodworking, I say you have what it takes to build a boat of your own using fishing boat plans.

I know that there’s a general idea that fishing boats are expensive. I should know, I used to believe that too. And it is true, fishing boats can cost you quite a bit. However, if you build your own fishing boat, that’s a different matter altogether. With you having to scrape off the labor cost of a DIY fishing boat, not to mention having full control of material choices, you can easily keep the cost of the boat down. Way cheaper than if you buy a boat kit or buy a boat.

However, for the building process to go as smoothly as possible, there are some things that you need to plan and consider. Some of these are:

There are many types of boat that you can consider. The most commonly used fishing boats are dories or jon boat. Personally, I think dories are good for novice builder. But if you want a slightly bigger boat, you should go for a jon boat. Jon boat can be pretty quiet thus making it ideal as a fishing boat since it doesn’t drive away fishes. Furthermore, jon boat allows for more capacity so you can bring some fishing buddy for the ride.

There are many options for you when it comes to materials used in building a boat. Most commonly used perhaps are wood, aluminum and fiberglass. Using any of those materials has its own advantages and drawbacks.

For example, a wooden boat is one of the easiest boat you can construct. It would just require a solid grasp of basic woodworking skills to complete the boat. Doesn’t require the use of power tools either. However, the main drawback of a wooden boat is that it has to be thoroughly protected from constant exposure to water as it is prone to rotting. That is why varnish or paint has to be thoroughly applied both for aesthetic as well as maintenance purposes.

There are two boat building techniques which I strongly suggest. Personally, I use either of these methods depending which serves me best on a given project. The first one is the simplest method of boat building. It’s called stitch and glue method. As its name implies, the whole process only involves the cutting of the different parts accurately, stitching it together and afterward, gluing it together. You will also save a lot from material cost using this process.

Another method is the ply over frame method. I use this technique if I want to achieve a higher level of durability and sturdiness in my boat. Comparatively speaking, it is more time intensive than the first method as it requires you to build a boat frame first prior to installing the plywood over the frame.

If you wish to make the whole boat building experience without the hassles that could unexpectedly crop up, you need to get a good fishing boat plan. Believe me, it will be a lot cheaper in the long run to invest in a quality boat plan. After all, the quality of the plan could spell the success or failure of a project.